Need new seals help.... - Page 2

COO · 03-03-2010, 08:35 AM

Sheesh, why can't things be simple???

Went back to recheck to see if I could find anything for a manufacturer/model/whatever... There is nothing on it to ID it.

The sandwiched gaskets are cork. Looks like I'll have to take a couple sheets of Buna rubber with me and make the seals from scratch.

Thanks for the help guys, I appreciate it.

COO

Fred Rhodes · 03-03-2010, 08:38 AM

The attached picture is of a Bray round dump valve.

http://www.bray.com/information/disp...ts/show/Valves

cityfiresix · 03-04-2010, 05:21 AM

Neet. We use Bray controlvalves on cement and flyash silos at the concrete batchplants where I work.

03-03-2010, 08:35 AM	#11
COO Senior Member Join Date: Dec 2008 Posts: 367	Re: Need new seals help.... Sheesh, why can't things be simple??? Went back to recheck to see if I could find anything for a manufacturer/model/whatever... There is nothing on it to ID it. The sandwiched gaskets are cork. Looks like I'll have to take a couple sheets of Buna rubber with me and make the seals from scratch. Thanks for the help guys, I appreciate it. COO

03-04-2010, 05:21 AM	#13
cityfiresix General Member Join Date: Jan 2010 Location: HAYWARD WI Posts: 10	Re: Need new seals help.... Neet. We use Bray controlvalves on cement and flyash silos at the concrete batchplants where I work.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode