Hale transfer case vented? - Page 2

Rapidfireservices · 03-22-2010, 12:30 AM

Fireman 19, If you would like more info on on how to do this, I'd be happy to send you information by fax, email, or discuss it with you on the phone. Before you call, write down the pump serial & model number and the pump transmission numbers if available. Also, you are going to need a 12 point 7/16 socket to pull the pump power shift cylinder body.
Kevin 888588 6976

03-22-2010, 12:30 AM	#11
Rapidfireservices Member Join Date: Aug 2007 Location: West Harrison, New York Posts: 72	Re: Hale transfer case vented? Fireman 19, If you would like more info on on how to do this, I'd be happy to send you information by fax, email, or discuss it with you on the phone. Before you call, write down the pump serial & model number and the pump transmission numbers if available. Also, you are going to need a 12 point 7/16 socket to pull the pump power shift cylinder body. Kevin 888588 6976

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode