![]() |
|
|
#1 |
|
General Member
Join Date: Mar 2009
Location: Brenham, Texas
Posts: 10
|
Hello All,
Has anybody have trouble with a Pierce Dash Cab with the A/C system just stops cooling. Full of feron and i have hear to put a filter in the the low side line. I heard that would help my problem. Anybody has any ideas let me know. Thanks Andrew Jozwiak Brenham Fire Department Email ajozwiak@ci.brenham.tx.us |
|
|
|
|
|
#2 |
|
Member
Join Date: May 2005
Posts: 66
|
Check your heater core and see if it is hot to the touch. Alot of times the heater valve goes bad and the heater core gets hot water through it still. The evaporator is right against it so it would defeat the cooling attempts of the a/c. Also check your fans on the roof. They also go bad quite a bit.
|
|
|
|
|
|
#3 |
|
General Member
Join Date: Dec 2007
Posts: 18
|
Depending on the year of your Pierce Dash's there are circuit breakers either behind the drivers seat(1999ish) or in the power distribution on the tunnel(2002ish). I have seen circuit breakers and relays in these locations fail.
Could you provide a little more information about the Rig? Also could you tell us what happens when the AC stops? Is the rig going down the road? Is it sitting in the station? Is the Load Manager activating and shutting it off? Is the compressor running? Are the fans on the roof turning? Also, FYI I have had to replace most every part on our fleet of 10 Dash's. I've found that companies like ThermoKing can order RED-Dot parts much cheaper than Pierce. |
|
|
|
|
|
#4 |
|
General Member
Join Date: Aug 2006
Posts: 27
|
What the press of the low and high side read? I do have problem with the filter on the low side end up I have to installed the inline filter to fix this problem. also check your condensor fans on top of the truck too they go bad too.
good luck.
__________________
Tin Pham Pinellas Park, FL |
|
|
|
|
|
#5 |
|
General Member
Join Date: Jul 2010
Posts: 4
|
Is your rig equipesd with a multiplex system, if so there are relay mounted in the cab and in the #4 vim cabient. Also pierce has suction screens installed in the a/c compressor, they will become cloged and cut off the flow to the compressor.
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|